Yes, floors can be sanded around furniture, but it is more challenging and time-consuming. It is recommended to remove furniture from the room before sanding to ensure a more even and thorough job. If removing furniture is not possible, the sander may need to be used by hand in tight spaces or around obstacles. Additionally, sanding around furniture may result in some areas being missed or not sanded as evenly. **

Yes, it is recommended to sand foiled furniture before painting over it. Sanding will help to roughen up the surface, allowing the paint to adhere better and prevent peeling or chipping. It will also help to smooth out any imperfections or rough spots on the furniture, resulting in a more professional-looking finish. Additionally, sanding will remove any existing glossy finish on the foil, ensuring better paint adhesion. **

Yes, furniture can be sanded down inside the apartment, but it is important to take precautions to minimize the mess and dust. It is recommended to use a dustless sanding system or to cover the surrounding area with plastic sheets to contain the dust. Additionally, wearing a mask and protective eyewear is important to prevent inhalation of the dust. It is also a good idea to open windows and use a fan to improve ventilation during the sanding process. **

It is generally recommended to fill any gaps or imperfections in the rim edge before sanding. Filling the rim edge helps create a smoother and more uniform surface, resulting in a better finish after sanding. Sanding alone may not completely remove all imperfections, so filling beforehand can help achieve a more professional and polished look. **

Plasterboard is sanded using a sanding block or a pole sander to smooth out any imperfections in the surface. The sanding process typically starts with a coarse grit sandpaper to remove any high spots or rough areas, and then progresses to a finer grit sandpaper to achieve a smooth finish. It is important to wear a dust mask and eye protection while sanding plasterboard to avoid inhaling the fine dust particles. After sanding, the surface should be wiped down with a damp cloth to remove any remaining dust before painting or finishing. **

To sand wood effectively, start by using coarse-grit sandpaper to remove any rough spots or imperfections. Then, gradually move to finer-grit sandpaper to smooth out the surface. Sand in the direction of the wood grain to prevent scratches. Finally, finish by wiping the wood with a damp cloth to remove any dust and debris before applying a finish or stain. **

Yes, engineered hardwood flooring can be sanded, but it is important to note that the number of times it can be sanded depends on the thickness of the top veneer layer. Thicker top veneer layers can withstand more sanding than thinner ones. It is recommended to consult with a professional before sanding engineered hardwood flooring to ensure it is done properly and does not damage the flooring. **

Yes, engineered wood flooring can be sanded, but it is important to note that the number of times it can be sanded depends on the thickness of the top veneer layer. Thicker veneer layers allow for more sanding, while thinner veneer layers may limit the number of times the flooring can be sanded. It is recommended to consult with the manufacturer or a professional to determine the best approach for sanding engineered wood flooring. **